B7300
Webdam
Join Date: Aug 2004 Posts: 3 Rogers, Arkansas |
2004-08-26 94597
I'm a new guy here, but I need help ! I've got a B7300HST and my 3 point won't go up or down, where do I start looking ? It's got fluid, was working fine. It got to where it would only work at higher rpm, now not at all.
thanks
Reply to | Quote Reply | Add Photo
B7300
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2004-08-27 94692
How long has it been since a filter and oil change? Is the valve below the seat open? ....
Reply to | Quote Reply | Add Photo
B7300
Webdam
Join Date: Aug 2004 Posts: 3 Rogers, Arkansas |
2004-08-27 94726
I changed the fluid, filter, and cleaned the strainer 11 weeks ago. The valve is open, (that one got me before!). It started all at once, at first it would only move with the rpms up, then it got to where it wouldn't move even at higher rpms. ....
Reply to | Quote Reply | Add Photo
B7300
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2004-08-27 94727
I would have to say that there might be more then you might want to go into. I would look at the spring centering rod on the right rear of the three point hitch here and see if it looks right or review the owners manual for proper adjustment. Do you have a loader or any other attachemntsw that use hydraulics? ....
Reply to | Quote Reply | Add Photo
B7300
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2004-08-27 94728
I would have to say that there might be more then you might want to go into. I would look at the spring centering rod on the right rear of the three point hitch here and see if it looks right or review the owners manual for proper adjustment. Do you have a loader or any other attachemntsw that use hydraulics? ....
Reply to | Quote Reply | Add Photo
B7300
Webdam
Join Date: Aug 2004 Posts: 3 Rogers, Arkansas |
2004-08-27 94729
No loader or attachments. The spring centering device is fine and the roll pin is still through the T shaped arm and the shaft that goes into the case. Is there any type of relief valve that could be stuck open ? When the 3 point worked and topped out, you could hear it load the engine, now the whole thing acts like the roll pin has fell out of the T shaped arm the actuating rod connects to. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This